.png)
.jpg)
product description：
China Masonhn Single Flange Dismantling Joint is applicable for welding with a flange on the one side, with a pipe on the other side. During the installation, adjust the installation length to the pipe and flange on the both sides, screw the bolts firmly one by one, weld the short pipes with the pipe, and then adjust the limited nut. This method makes it possible for the pipe to expand and contrast freely within the allowable range of the expansion joint. It also can secure the safe operation.
China Masonhn Single Flange Dismantling Joint is applicable for welding with a flange on the one side, with a pipe on the other side. During the installation, adjust the installation length to the pipe and flange on the both sides, screw the bolts firmly one by one, weld the short pipes with the pipe, and then adjust the limited nut. This method makes it possible for the pipe to expand and contrast freely within the allowable range of the expansion joint. It also can secure the safe operation.
Remark：
Sizes: Smallest OD = 48.3mm, Largest OD = 2000mm.
Dismantling Joint materials: Stainless Steel Options = AISI 304/ AISI 316L. Coated Steel Options = Galvanized/ Rilsan/ PVC/ Epoxy
Temperature: EPDM -40℃ to +100℃, NBR -20℃ to +80℃, HNBR -20℃ to +150℃, Viton -20℃ to +250℃
Pipe Materials: Carbon steel, cast and ductile iron, stainless steel, copper, cunifer
Temperature: EPDM -40℃ to +100℃, NBR -20℃ to +80℃, HNBR -20℃ to +150℃, Viton -20℃ to +250℃
Pipe Materials: Carbon steel, cast and ductile iron, stainless steel, copper, cunifer
